How to Use the Wood Stove , Split Unit, and Oil Heat
The thermostat remote for the Mitsubishi Split Unit is mounted on the wall in the living room. This remote controls the overhead unit. The plate on the front slides down and you can toggle the settings. The sun is heat; snow flake is AC; and as a default during the months when it’s not cold we keep it on the water droplet symbol, which is the De-humidity setting.
Please leave this one set on the water droplet de-humidity setting to keep the house dry and cool. If it's feeling warm just pop this one on a lower temperature by setting it on “snow flake”. The house will cool down fast. The lower thermostat should be off.
The Lowe thermostat (also mounted to the wall in the living room) only does the oil heat and we prefer to keep it off with the exception of very cold temperatures.
DURING COLD MONTHS
For a moderate temperature of 67/68 locate the “sun symbol” on the Mitsubishi Split Unit and then keep the oil on around 64/65 to create an efficient heating system. The split unit will keep the house warm and when the temperature drops the oil will kick on. The oil works very well, almost too well, so keeping the thermostats at these moderate levels will keep this little cabin cozy. Feel free to crank higher if need be.
THE WOOD STOVE
The wood stove is available to you as well, you can snag bundles of wood from the grocery store. Or inquire with us, we try to keep a stock for guests.
Using a wood stove requires caution and knowledge to ensure safety and efficient operation. Here are step-by-step instructions:
Checking the Flue Vent:
The vent needs to be in the open position while getting the fire to a good base, the lever pushed all the way to the RIGHT is OPEN.
Lighting the Fire:
Be sure the vent lever is in the full right position. Start with tiny shards of wood you peel off the logs or from the bucket we have provided, Ball up paper grocery bag or paper trash that is available, put the small shards in a pile on top of the paper and add larger stuff as your base builds.
Maintaining the Fire:
Once the fire is burning steadily, add more firewood as needed. Ensure not to overload the stove, as this can reduce airflow and cause excessive smoke.
Regulate Airflow:
Monitor the stove's temperature and adjust the air vent damper as needed to control the intensity of the fire. Opening the vents increases airflow and heat, while closing them reduces both.
Safety Precautions:
Never leave the wood stove unattended while it's burning. Keep flammable materials, curtains, furniture, and any other potentially hazardous items at a safe distance from the stove. Use a fireproof rug or hearth pad in front of the stove to catch any embers or ash that might fall.
Extinguishing the Fire:
Allow the fire to burn down to a low smolder. Use a poker to rearrange the wood and allow it to burn out naturally. Close the air vent damper when you're done using the stove to restrict airflow and extinguish the fire completely.
If you're unsure or uncomfortable with using the wood stove, give us a shout. Safety is paramount when using any wood-burning appliance and we are happy to help.